Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. * Finished stripping the sp215 wires and crimped them * Desoldered the female header from the board and fixed a male header to replace it * Practiced desoldering using various techniques * Assembled sp215 to housing * Tested boards by connecting to gateway * Submitted order form for Adafruit * Worked on Mid-Semester Report weatherbox/apple/meeting_minutes_week_of_october_08_2023.txt Last modified: 2023/10/12 22:04by snakahir