Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Minutes 10/13/15 ====== ===== Pre-Questions ===== *Is the I²C only on the Pressure Sensor? *Block Diagram help. *What are 0 resistors used for? *Ambient Temperature and Roof Temperature? ===== Minutes ===== *The zero ohm resistors are usually used as placeholders. *Block diagram - should be able to show it to somebody who just started on the project. *BD- try to be able to explain it to somebody. "what did we want to have when we came in?" *one computer has an eagle lis *The two different temp sensors are for in the box and out of the box. *Theres an external temperature sensor that was previously on the apple box. *I2c- uses the temp, humid, and the current sensor are the ones that are tied to the i2c bus. *Future interface was going to be used to debug but was never put in. *Ask Jon about the big cap - on the charger * weatherbox/meeting_minutes_10_13_15.txt Last modified: 2021/09/19 21:59(external edit)