Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Website Team Meeting - March 24, 2016===== **Attended: Keane, Dylan, Tyler and Garrett** =====Updates===== * Housing 3D printing complete * Need to drill bigger holes to fit solar panel * Need to drill bigger hole for solar panel plug to fit * Final PCB design complete * Sent files to Tyron * Waiting to mill * Code complete (pending testing) * Battery Voltage needs to be tested * wrote code to process panel voltage (Need to be tested) * Solar irradiance pins known =====Problems===== * Unsure if output is correct * Housing * hole for solar panel plug too small * solar panel doesn't quite fit onto housing * need to drill bigger holes in micromouse =====Reminders===== * Buy PVC and screws for mounting * Design new bottom for housing * Account for drop in voltage from diode weatherbox/team_nova/meeting_minutes_april_4_2016.txt Last modified: 2021/09/19 21:59(external edit)