Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Meeting Log===== Today we started measure and designing a housing unit for our project. We were able to design our entire unit but we weren't able to print it out due to the time it would take. However, we were able to print out the wall piece of the unit but nothing else. After designing everything, we learned how to solder as our wall was printing out. We practiced soldering on resistors and boards. weatherbox/team_peacock/meeting_minutes_july_19_2016.txt Last modified: 2021/09/19 21:59(external edit)