Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Basic Arduino API Communication ====== Here are short tutorials to ensure your XBee's are communicating when hooked up to an Arduino. ===== Test Blink ===== This is a short tutorial to test if the Arduino receives a signal. Make sure the board's 13 pin LED light shown in the tutorial lights up. https://www.norwegiancreations.com/2013/10/arduino-tutorial-1-lets-make-xbee-talk/ ===== Communicating Prints ===== http://www.mechakana.com/blog/getting-started-with-the-arduino-and-xbee/ weatherbox/team_quasar/basic_arduino_api_communication.txt Last modified: 2021/09/19 21:59(external edit)