Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
weatherbox:team_rocket:sensor_readings [2016/04/14 01:02] aobatake created |
weatherbox:team_rocket:sensor_readings [2021/09/19 21:59] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | FOLLOW REIS SCHEMATIC!!!!! Except for solar irradiance (Green is voltage, clear is ground) | + | ==== Pressure Sensor ==== |
+ | * Temperature: 22 C | ||
+ | * Heats up under lamp | ||
+ | * Only Celsius readings | ||
- | Pressure sensor | + | ==== Humidity Sensor ==== |
- | Temperature: 22 C | + | * Temperature: 25 C |
- | Heated up under lamp | + | * Celsius and Fahrenheit readings |
- | Only Celsius readings | + | |
- | Humidity and sensor temperature | + | ==== Temperature Sensor ==== |
- | Temp: 25 C | + | * Temperature: 25.5 C |
- | Celsius and Fahrenheit | + | * Celsius and Fahrenheit |
+ | * Only changes by half a degree | ||
- | Temperature | + | ==== Charging Circuit Readings ==== |
- | Temp: 25.5 C | + | |
- | Measures Celsius and Fahrenheit | + | |
- | Only changes by half a degree | + | |
- | + | ||
- | Charging Circuit Readings | + | |
Voltage Source Only: | Voltage Source Only: | ||
Input (V) Load Output | Input (V) Load Output | ||
Line 35: | Line 33: | ||
5.4 4.55 | 5.4 4.55 | ||
- | Xbee and pressure sensor needs 3.3V. | + | ==== Other Notes ==== |
- | + | * Follow REIS schematic, except solar irradiance (green is voltage, clear is ground) | |
- | Analog read for solar irradiance | + | * Xbee and pressure sensor needs 3.3V. |
- | Change conversion (multiply value by 1000 from V to mV) | + | * Analog read for solar irradiance |
- | Maxes out at 1246ish | + | * Change conversion (multiply value by 1000 from V to mV) |
+ | * Maxes out at 1246ish |