Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ===== Verification Team Meeting - November 09, 2015 ===== Attended: May Chen, Kristie Lee, Jon Liang, Kenny Luong =====Notes===== * Implementation of Verification Board (VB) * Output of VB --> Input of Apple * Use ADC to check voltage measurements * Will need a memory chip =====Progress Check===== * Working on figuring out what we want our Verification Board to check on Apple =====Tasks===== * Get "bare bones" circuit with ATmega working (by 11/13/2015) * Use a simple "Blink" program to check * Figure out what we want to use our Verification Board to check on Apple (before 11/21/2015) * Sensors, chips, etc. * Have verification board design/layout ready to be sent out by the end of the semester * Look at Apple schematics and see how it gets programmed =====Completed===== * Met with Jon & Kenny to clear up verification board problems * Got ATmega to blink LED with a "bare bones" circuit weatherbox/verification/meeting_minutes_-_november_09_2015.txt Last modified: 2021/09/19 21:59(external edit)