Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. * Set up BME 280 chip to breadboard to detect humidity, temperature, and pressure * Set up SP 215 to find solar irradiance * Connected both setups to the breadboard to measure both at the same time * Technical difficulty troubleshooting the code * Started Eagle Schematics * Technical difficulty with finding the parts in Eagle Library (All three members were present) weatherbox/week3_-_february_6th_2024.txt Last modified: 2024/02/07 05:59by andydh