Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. Members present: Joy, Gordon * Eagle Tutorial (Part 2) * Placed schematic from last session onto a board * Learned to trace components together using wires * Used top layer, bottom layer, and vias to manipulate the location of wires to connect the components * NO 90 DEGREE ANGLES for wires * Gordon had issues because he started with an incorrect component and had to replace it but airwires (golden wire) disappeared and could not connect it via wires due to the missing airwires. So he continued the tutorial missing one component * Joy had issues connecting components with wires and moving parts, she had to restart the Eagle program because of it. Also had general difficulties with moving components and wires around. * We ended our day on the copper pour step weatherbox/week_3_-september_15_2022.txt Last modified: 2022/09/16 06:51by gho