Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====Monday, February 8th, 2021==== Members present: Marvin, Ryan *Continued EAGLE ====Tuesday, February 9th, 2021==== Members present: Marvin, Ryan *Tested BME280 sensor on Bare Bone Arduino Problems: *When loading BME280 example, error occurred; probably was impatient to wait for uploading to finish *Error occurred after example properly finished uploading; "programmer is not responding" *Tested BME280 sensor on Arduino Uno; sensor worked fine *In Arduino IDE, board was set to "Arduino Nano" instead of "Arduino Uno"; error again, "programmer is not responding" *Wired breadboard 'the SPI way'; error again, "programmer is not responding" *Will be redoing wiring of breadboard next week weatherbox/week_4_-february_7_2021.txt Last modified: 2021/09/19 21:59(external edit)