Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. Attendance: Amy was absent * Continued Bare Arduino * Connected the BME280 and SP215 to the Bare Arduino * Troubleshooted wiring and connection to the Arduino board * Concluded the BME280 was located too close to the FTDI * Working now :) * Learned about the XBees and experimented a little to understand the how the sensors send and receive data weatherbox/week_8_-_march_13th_2024.txt Last modified: 2024/03/14 05:04by carlosjm