Differences

This shows you the differences between two versions of the page.

--- weatherbox:apple:meeting_minutes_week_of_november_4_2019 [2019/11/06 22:12]
achen created
+++ weatherbox:apple:meeting_minutes_week_of_november_4_2019 [2021/09/19 21:59] (current)
@@ Line 7: / Line 7: @@
   * Trying to fix voltage problems
   * Update Eagle schematic and PCB to have the RX connected to pin 2 and TX connected to pin 9 on the Pro Mini.
   * Continue making more PCB boards and taking apart the old ones to reuse their female/male headers
   * Update Wiki
+Convert Eagle Files to Gerber Files: Make sure to be in "Board Eagle Window"
+  * change with the dimension readings from "inch" to "mm" since SEEED Studio only takes
+  * them in "mm", right click on the dimension arrows where it'll eventually light up and pop-up options
+  * -> Properties -> click on "Unit" to change from inch to mm then follow below
+  * -> File -> CAM Processor... -> CAM Processor window will pop-up takes 3 seconds
+  * -> check box "Export as ZIP", you may check over the individual layers on the left side under "Gerber"
+  * -> Finally click "Process Job" -> save the ZIP file in your desired directory -> OK -> "Discard"
+To save pictures of the Eagle Schematic and Board:
+  * -> File -> Export -> Image -> Browse (for desired directory to be saved in) -> OK
+SEEED Studio Options
+  * -> Google "seeed studio pcb" -> click on "Fusion PCB/PCBA - Seeed Studio" -> Add Gerber Files
+  * -> Mostly everything stays the same except the dimensions *Units in mm, desired PCB color,
+  * and maybe the number of layers if more than the usual 2 layers (or less)