Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. **Attended: Dante, Kaniela, Brandon, Guanchen ** === Updates === * No updates on the XBEE3 Pros * Spoke with Dr. Kuh * Setup and 3d printed base of the weatherbox with hole * Xbee 3 connects to others as a Router however not as a Coordinator * Called XBEE support, waiting for call back ===To Do=== * Outdoor Range test with Xbee 3 and Xbee S2C pros again with new members * Try to collab with hardware team to do range testing with real data * Research and test housing + 3D printing * Figure out sealing for Housing (gasket, rubber seal) weatherbox/bumblebee/week_3_-_february_5_2025.txt Last modified: 2025/02/06 03:44by kanielap