Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ==== Monday February 24th, 2025 ==== Members present: Jayden, Jordan, Andy, Korie * continued trying to soldering boards with reflow oven, solder would not melt (ran out of time) * think it is because we let the solder dry for too long while we were waiting for the schottky diode * populated another REV E1 board (place on oven immediately to avoid the same issue) ==== Wednesday February 19th, 2025 ==== Members present: Jayden, Jordan, Andy, Korie * Put in order form for new parts ( weatherbox/guava/week_6_-_february_24_2025.txt Last modified: 2025/02/25 05:15by jrmo