This is an old revision of the document!
Minutes September 24, 2018
People attended: Jason, Alex
- Replace present voltage regulators (2) that were outputting 0.1mV
Minutes September 25, 2018
People attended: Jason, Alex
- Replace header that was melted off due to Reflow station(PCB Heater)
Minutes September 26, 2018
People attended: Jason, Alex
- Problem: When removing the header, the pins of the header got stuck in the PCB.
- Kenneth helped to remove the pins.
Minutes September 28, 2018
People attended: Jason, Alex
- Worked on Powerpoint for PDR.