Steps

Here is a list of recommended PCB manufacturers:

• Bay Area Circuits
• Advanced Circuits
• Osh Park

Research and determine if your design is machinable by the manufacturer you chose. You can enter their specifications into the Design Rule Check tool in Eagle.

1. Download the .cam file from Sparkfun
2. Open job on Eagle
3. Make sure the correct layers are included in each category
   • Top/bottom copper
   • Top/bottom silkscreen
   • Drills/holes
4. Click on “Process Job” to generate Gerber files

1. Download the following files from Google Drive
   1. 4 Layer CAM job
2. Run ULP drillcfg
3. Run Excellon job
4. Run E4 job

1. Use the program Viewmate to check if the Gerber files were processed correctly
   1. Viewmate