Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
weatherbox:bumblebee:bootloading_troubleshoot [2022/03/08 03:46] jgrous |
weatherbox:bumblebee:bootloading_troubleshoot [2022/03/08 04:29] (current) jgrous |
||
|---|---|---|---|
| Line 4: | Line 4: | ||
| * https://docs.arduino.cc/built-in-examples/arduino-isp/ArduinoISP | * https://docs.arduino.cc/built-in-examples/arduino-isp/ArduinoISP | ||
| * https://docs.arduino.cc/built-in-examples/arduino-isp/ArduinoToBreadboard | * https://docs.arduino.cc/built-in-examples/arduino-isp/ArduinoToBreadboard | ||
| - | * Copy the schematic below but instead of using two Arduino Boards use one Arduino Board as the programmer and the PCB as the target. On the PCB, pins MOSI, MISO and SCK are the same pins as digital pin 11, 12 and 13, respectively. | + | * Copy the schematic below but instead of using two Arduino Boards use one Arduino Board with ATMEGA 328P microcontroller as the programmer and the PCB as the target. On the PCB, pins MOSI, MISO and SCK are the same pins as digital pin 11, 12 and 13, respectively. |
| * {{:weatherbox:bumblebee:programmer_to_target_2022-02-07_190812.png?400|}} | * {{:weatherbox:bumblebee:programmer_to_target_2022-02-07_190812.png?400|}} | ||
| * Linked here is the pin-out for the PCB. | * Linked here is the pin-out for the PCB. | ||
| Line 10: | Line 10: | ||
| * Once finished wiring the Arduino and PCB, Connect the Arduino to the computer and open Arduino IDE | * Once finished wiring the Arduino and PCB, Connect the Arduino to the computer and open Arduino IDE | ||
| * Open Arduino ISP under: File -> Examples -> 11.ArduinoISP -> ArduinoISP | * Open Arduino ISP under: File -> Examples -> 11.ArduinoISP -> ArduinoISP | ||
| - | * Tools should have the following configuration | + | * Tools should have the following configuration (Connect to port with (Arduino/Genuino Uno)) |
| {{:weatherbox:bumblebee:screenshot_2022-02-07_184917.png?400|}} | {{:weatherbox:bumblebee:screenshot_2022-02-07_184917.png?400|}} | ||
| * Upload code to Arduino Uno: | * Upload code to Arduino Uno: | ||