Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ==== Meeting Minutes March 12, 2018 ==== **Attended: Alex(s), Kayla** === Updates === * Prepped second board for bootloading and programming * Continued to test code on first board ===To Do=== * Bootload and program second board ==== Meeting Minutes March 16, 2018 ==== **Attended: Alex(s), Kayla** === Updates === * Unable to bootload second board because board cannot be detected. * Programmed first board but Xbee cannot be kept in always awake mode. Can only be kept in cyclic sleep mode. ===To Do=== * Cut the connection between the microcontroller and the Xbee sleep command pin and have Xbee set to always on mode in XCTU * Rewire second board and check connections in the bootloading circuit setup. weatherbox/bumblebee/week_9_-_march_12_2018.txt Last modified: 2021/09/19 21:59(external edit)