Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Cranberry Team Meeting #11 - November 19, 2015===== **Attended: Brandon, Kim Pee, Christie** =====Updates===== * Although expected voltages are obtained, battery unable to be charged; new board is assembled * Power module operational on new board * Proper voltages supplied to components * Battery able to charge * Charging rate determined by resistance value at PROG1 pin (rate = 1000V/PROG1) * 1.0Kohm = 1000mA * 2.0Kohm = 500mA * Completed main components in Eagle * Remaining misc. components * Power module * Schottky Diode * Tantalum Electrolytic Capacitor * Connectors - JST, Pin Headers, 1.3mm Barrel Jack * Power Budget and BOM completed =====Problems===== * N/A =====Reminders===== * Finish making misc. components * Begin incrementally assembling and testing MCU * Continue to clean up and understand Cranberry schematic * Begin board layout of schematic * Prepare for Critical Design Review - November 21, 2015 weatherbox/cranberry/meeting_minutes_november_19_2015.txt Last modified: 2021/09/19 21:59(external edit)