Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Cranberry Team Meeting #8 - October 29, 2015===== **Attended: Brandon, Kim Pee, Christie** =====Updates===== * Finished ATMEGA328P MCU and IC Switch in Eagle * Practiced soldering and desoldering components * Anchor pin by placing small amount of solder on pad * Attach pins individually * Soldered power module - solar chargin chip, 3.3V voltage regulators, and various capacitors and resistors * Tested continuity and for bridged connection of solder parts =====Problems===== * Confusion with interpreting land pattern of MCU on datasheet * Discrepancy with border length * Bridged connections when solder voltage regulator pins due to inexperience with soldering =====Reminders===== * Finish making XBee and discrete components in Eagle * Test the proper functionality of power module; measure input and output voltage values * Clean up schematic and remake Cranberry board in Eagle * Meeting with Jon on Monday (11/2) weatherbox/cranberry/meeting_minutes_october_29_2015.txt Last modified: 2021/09/19 21:59(external edit)