Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====Updates==== * Started debugging v-reg heating up issue * Powered only the main board with sensor board disconnected and main v-reg output was 3.3v * Powered the two boards connected with battery and main v-reg output was 1.1v * Continue soldering 2nd Cranberry 4.1 board weatherbox/cranberry/meeting_minutes_september_10_2018.txt Last modified: 2021/09/19 21:59(external edit)