Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Connecting/Debugging Apple===== Purpose: Help those who wish to run software debugging on the current (as of 10/16/2015) Apple board. =====Problem===== When the Arduino is connected to the Apple board, it is near impossible to have the USB cord connected to Arduino to run the Serial Monitor (tool for debugging). =====Solution (Tentative)===== - De-solder the pins and components in the way =====Solution===== * Request a re-design of the Apple board * Attempt wireless debugging * Use hardware-independent code (when it's completed) =====Disclaimer===== This error was encountered by us, in our attempt to verify that the sensor code polls data. We were only seeking to receive noise data, as we have chosen a board that is missing many of its components, which is what led to our tentative solution. weatherbox/firmware/apple_board_connectivity.txt Last modified: 2021/09/19 21:59(external edit)