weatherbox:firmware:arduino_library_support [Smart Campus Energy Lab Wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=====Arduino Library Configuration=====
Purpose: Help those who run into Arduino library errors when using code obtained from SCEL's GitHub

=====Problem=====
When compiling a .ino, you run into errors that concern undefined references to libraries (.h) and possibly functions from those libraries.

=====Solution=====
  - With the .ino opened, open the Sketch Folder locations (use one of the following)
    * Sketch > Show Sketch Folder
    * Ctrl - K
  - Ideally this location will be in a directory titled "Arduino" (if not we strongly recommend moving your sketch folder into this location)
  - Locate the "libraries" folder in your sketch folder
  - Copy all folders in this folder 
  - Locate the "libraries" folder located in the "Arduino" folder
  - Paste the folders you copied into this "libraries" folder

=====Disclaimer=====
If you do not use the "Arduino" folder created when installing Arduino IDE as a parent folder for your sketches, you may run into other errors that we, the Firmware team, have not encounter and thus do not have a current resolution.  We strongly suggest doing so.