Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Firmware Team Meeting - October 6, 2015===== **Attended: Scott, Jason, Ryan** =====Updates===== * Compiled and ran Apple-core sensor code * Obtained readings and noise from pins * Drafted algorithm for new Apple code =====Problems===== * Running debug on Apple board (tentatively resolved) * Connecting to Apple board (tentatively resolved) * 0 constantly obtained from Solar Irradiance sensor (resolved) =====Reminders===== * All Hands Meeting on 10/17/2015 * Re-run the Serial Monitor to check values of Temperature and Pressure =====Goals===== * Finalize algorithm * Create a block diagram * Prepare for next all hands meeting =====Other Notes===== * For Solar Irradiance sensor: without Op Amp, sensor pin is grounded * Current board design of Apple is difficult to run debugs on * USB cord is blocked by components on board * Temperature and Pressure sensor is on the board, should be giving back appropriate values weatherbox/firmware/meeting_minutes_october_6_2015.txt Last modified: 2021/09/19 21:59(external edit)