Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ==== September 8 2020 ==== Met virtually and filled out forms to order the parts for our REV D. Showed Blake how to bootload the ATMEGA1284P and how to use Arduino IDE. //Members: Blake, Diwen, Max, Riley //Time: 5:00 PM - 8:00 PM ==== September 10 2020 ==== Met virtually and went over code in the SCEL github. We found the code to program our board and checked to make sure it made sense and worked properly. //Members: Blake, Diwen, Max, Riley //Time: 6:30 PM - 7:30 PM weatherbox/guava/week_2_-_september_7_2020.txt Last modified: 2021/09/19 21:59(external edit)