Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ==== September 15 2020 ==== Met virtually and helped Blake with EAGLE tutorials. We showed him the schematic and design of our board. Discussed plans about going into lab. //Members: Blake, Diwen, Max, Riley //Time: 5:00 PM - 7:00 PM ==== September 16 2020 ==== Met virtually with Dr. Kuh and Raellis to discuss safety precautions about going into the lab. //Members: Blake, Diwen, Max, Riley //Time: 6:30 PM - 7:30 PM ==== September 17 2020 ==== Met virtually and reviewed code again on Github. Also found tutorials on how to use PCB stencil and the reflow oven in the lab. //Members: Blake, Diwen, Max, Riley //Time: 10:00AM - 12:00PM weatherbox/guava/week_3_-_september_14_2020.txt Last modified: 2021/09/19 21:59(external edit)