Differences

This shows you the differences between two versions of the page.

--- weatherbox:guava:week_9_-_october_27th_2019 [2019/10/30 19:51]
aereno created
+++ weatherbox:guava:week_9_-_october_27th_2019 [2021/09/19 21:59] (current)
@@ Line 3: / Line 3: @@
 =====October 31th, 2019=====
+The meeting with connect was postponed to Saturday and as such, we moved our lab hours to accommodate his presence.
+=====November 2nd, 2019=====
+Informed Kenneth about the design:
+- The design had changed GND_T to GND
+Changed the clock from 8Mhz to 16Mhz
+Must have new traces/signals on the header for the FTDI since the original design was meant to run off of the same voltage as a battery.
+-Problem with programming the board:
+The board was not being grounded by the same thing that's powering it in the case of using a battery while programming the board. The fix was to create a wire that connected the battery's ground to the ground on the FTDI. This meant that the board was being grounded by the computer instead of the battery, which distorted the programs ability to send the correct data.