Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ==== Thursday September 15th, 2022 ==== Members present: Zach, Logan *Transferred EAGLE schematic to board layout *Learned to place components onto the board *Learned how to route connections between the components(using connections in top and bottom layer) *Dealt with routing issues(45 degree angles only, clearance errors, overlapping connections) *Learned to copper pour *Need to figure out most optimal way to place components in order to make routing easier *Reached Gerber step of tutorial weatherbox/week_3.txt Last modified: 2022/09/16 05:27by zpang