weatherbox:bumblebee:how_to_range_test

This is an old revision of the document!

Using the XCTU Program:
  1. Make sure everything is connected: wires, code is correct
  2. Make sure all Xbees recognize one another
  3. Make sure coordinator receives packets so you know that relay and sending Xbee works
  4. XCTU Program
    • Tools → range test
    • Select remote radio device: relay Xbee
    • Can choose how many packets to send (usually 15)
    • Start Range Test after
  • weatherbox/bumblebee/how_to_range_test.1586831568.txt.gz
  • Last modified: 2021/09/19 21:59
  • (external edit)