This is an old revision of the document!
Meeting Minutes March 19, 2018
Attended: Alex(s), Kayla
Updates
- Rebuilt circuit on breadboard to do more testing with the XBee's different modes.
- Checked continuity on all of the XBee header pins on the PCB to see if there were any bad joints.
- Resoldered bad joints on XBee header pins.
- Successfully ran Bumblebee test code on PCB.
To Do
- Test power circuit on first board.
- Bootload and program second board.
Meeting Minutes March 23, 2018
Attended: Alex(s), Kayla
Updates
- Determined we need to change bootloader on not bootloadable board
- Tested working board with gateway
- Currently doing battery test with working board