Members present: Marvin, Roel, Kayla, Juliana

• Notes:
  • the difference between the “raw” data output and converted
    • “raw” data = analog signal data read from the board
    • converted data = uses the analog data and converts the value into digital with formula
  • board readings
    • board with the blue dot:
      • BME280 readings
        • Humidity: 0
        • Pressure: 0 (error with pressure)
        • Temperature: 273 K
      • SP215 readings (solar irradiance)
        • proper reading (possibly? - giving actual values that fluctuate with the sun simulator)
    • board with the red dot:
      • BME280 readings
        • proper reading (possibly? - giving actual values)
        • Humidity: 37%
        • Pressure: 101481 Pa
        • Temperature: 300 K
      • SP215 readings (solar irradiance)
        • proper reading (possibly? - giving actual values that fluctuate with the sun simulator)

* worked on mid-semester report

Members present: