Meeting with Jon
Pre-Questions
- I2C stuff
- 0 ohm resistors
- giant cap on the charging circuit
Minutes
- Don't use less than 10 mils in the traces
- Don't start from scratch with Apple
- The current schematic is crowded
- first step would be to clean up
- JOn's rules use groups
- Group 1 would be power
- Group 2 would be ic sensors
- stay away from large traces that go across the entire page, instead use the label tool
- don't use the ticket labels for power/ use the arrows
- clean up the current schematic/ make it easier to follow the traces
- SECTIONED APPROPRIATELY (have clear things)
- TECHNICAL DETIALS (NAME AND VALUE) (ratings and tolerances on the schematic)
- the 0 ohm resistor is a JUMPER used for getting faster
- maybe break things up to
- 1. schematic [electrical aspects]
- 2. assembly guy (parts and assembly) [inbetween both mech and elec]
- 3. housing guy (the box and stuff) [mechanical]
- Bill of material to start things off.
- The thru holes are bigger. SM are smaller/ on a professional level reducing space cuts costs as well
- need to watch the plugged in programming (debugging)
- layout do it on the prof lisc. the schematic can be done on the free vers.
- make sure you have the things linked (make sure to keep the things updated)
- parts lists of the housing stuff including the misc elec items like the headers
Authors
Contributing authors:
Created by dkvilla on 2015/10/13 23:47.