• Finished circuit schematic set up on breadboard and powered it with a 3.7V battery
• Downloaded XBee library on github onto Arduino software
• Read XBee S2B manual about API and AT Mode
• Prepared for Preliminary Design Review

• Battery used supplies 3.7V but drop voltage of the LM3940 IT voltage regulator is 0.5V (3.7V - 0.5V = 3.2V)
  • 3.2V may or may not cause issues when powering XBee S2B so might add voltage booster
• Unsure on how to connect router XBee S2B to XCTU wirelessly
• Uploading Arduino code failed (Series2_Rx file) - XBee/XBeeResponse/ZBRxResponse does not name a type

• Proposal presentation on October 8th, 2016
• Document everything

Back to Ant (Xbee Box) Homepage

Contributing authors:

Created by ssaepoo on 2016/10/17 11:01.