• Debug Apple V.4.2.1
• Fix RTC Code Error from Fall 2021
• Research new solar irradiance sensor
• Populate 2 Apple V.4.3 PCB boards
• Brainstorm Housing Ideas and apply to housing design \

• Build 5 More Apple weather boxes
• Have a network of Apple boxes that communicate with each other
• Continue to refine the design of Apple
• Ensure the protection of the circuit board with minimal interference in the housing
• Include drilled holes on the base of the housing to regulate temperature and increase airflow

• Test and Debug Apple v4.2.1 board (REVISE for v4.3)
• Fix RTC Function Codes (REVISE for v4.3)
• Implement updated version of Apple v4.2.1 as Apple v4.3
• Populate Apple v4.3 board
• Finalize PCB housing design, implement new ideas for future housing designs
• After obtaining roof access, debug and test Apple V.4.0.0

• Continue Fixing Apple v4.0.0 Weatherbox and re-deploy
• Populate and reincorporate BMP280 and Arduino Pro Mini into Apple v4.1.0 Weatherbox

• Build 5 Apple weather boxes
• Have a network of Apple boxes that communicate with each other
• Continue to refine the design of Apple

• Look into Cranberry and figure out the solution for battery situation
  
• Test and Debug our first completed v4.0.0 board
• Deploy our first board and watch for any problems to occur

• Build 1-2 Apple Weatherboxes
  • Create an easy to assemble housing structure
  • Solve power problems

• Build 3 Apple weather boxes
• Have a network of Apple boxes that communicate with each other
• Continue to refine the design of Apple

• Explore ways to advance the current Apple design
  • Create an easy to assemble housing structure
  • Solve power problems
• Improve the documentation of Apple
  • Update the schematic and board design

• Build 5-6 Apple weather boxes
• Have a network of Apple boxes that communicate with each other
• Continue to refine the design of Apple

Back to Apple Homepage

Contributing authors:

Created by jcarpenter on 2017/01/18 21:02.