Attended: Kaeo, Tryston, Tyrin, Michael, Ernesto, Brianne

• Finished soldering passive components
• Got 5 irradiance sensors mounted to the leveling plate and crimped the wires
• Soldered wires to temperature sensors and crimped the wires
• Got second prototype of the housing
• Currently making adjustments for housing
• Flipped the chip to get the pins for IC switch in its correct position

• On the PCB the left and right side of the IC switch are switched so first pin is located on the right side instead of starting from the left side
• Even though we flipped the chip to get the correct pins in their proper place the power wonʻt go through

• Research mounting techniques

Back to the Apple Homepage

Contributing authors:

Created by mleong on 2016/03/17 23:06.