Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ===== Week 14 ===== ==== Meeting Minutes November 27, 2018 ==== **Attended: Mizpah, Sharmaine, Xiao** === Updates === * Changed XBee header * Tried transmitting using the relay, however, the coordinator did not receive any packet. - we thought relay XBee is not transmitting because the header pin for the TX is broken - still not transmitting after we changed the header ===To Do=== * Contact Andrew for help ==== Meeting Minutes November 28, 2018 ==== **Attended: Mizpah, Sharmaine, Xiao** ===Updates=== * Andrew checked the connection of the XBee again and suggested two possible solutions: - change the Destination Address for the sending XBee to default (0x00, 0xFFFF) on both the code and XCTU - this will determine whether the sending XBee is communicating with the other XBee - coordinator received packets directly from sending XBee - change relay XBee - still didn't transmit --> coordinator didn't receive any packet * Used an Arduino board and uploaded relay code to act as the relay node - coordinator received packets from relay XBee ===To Do=== * Work on Final Presentation PPT ==== Meeting Minutes November 30, 2018 ==== **Attended: Mizpah, Sharmaine, Xiao** ===Updates=== * Updated meeting minutes on wiki * Updated Readme.md and code on Github * Finish Final Presentation PPT ===To Do=== * FINAL PRESENTATION tomorrow 12/01/18 weatherbox/bumblebee/week_14_-_november_26_2018.txt Last modified: 2021/09/19 21:59(external edit)