Attended: Mizpah, Sharmaine, Xiao

• Changed XBee header
• Tried transmitting using the relay, however, the coordinator did not receive any packet.
  1. we thought relay XBee is not transmitting because the header pin for the TX is broken
  2. still not transmitting after we changed the header

• Contact Andrew for help

Attended: Mizpah, Sharmaine, Xiao

• Andrew checked the connection of the XBee again and suggested two possible solutions:
  1. change the Destination Address for the sending XBee to default (0x00, 0xFFFF) on both the code and XCTU
     1. this will determine whether the sending XBee is communicating with the other XBee
     2. coordinator received packets directly from sending XBee
  2. change relay XBee
     1. still didn't transmit –> coordinator didn't receive any packet
• Used an Arduino board and uploaded relay code to act as the relay node
  1. coordinator received packets from relay XBee

• Work on Final Presentation PPT

Attended: Mizpah, Sharmaine, Xiao

• Updated meeting minutes on wiki
• Updated Readme.md and code on Github
• Finish Final Presentation PPT

• FINAL PRESENTATION tomorrow 12/01/18

Contributing authors:

Created by sjavier on 2018/11/30 18:14.