Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Week 9===== ====Meeting Minutes March 14, 2017==== **attended: Isaiah, Kayla** === Updates === * Tried to re-burn the bootloader of our atmega to run using its internal 8 Mhz clock * unable to burn it * Tried using 2 3.3V regulators * one to power the xbee and the other for the atmega * xbee needs at least 3.3V to run (nothing below that) ====Meeting Minutes March 16, 2017==== **attended: Isaiah, Kayla** === Updates === * The Xbee is able to receive packets when getting only 2.8V * Only works when the atmega is receiving 5V, but not 3.3V * Only works with the 16MHz clock and not the 8MHz clock * Re-burned the bootloader with "Arduino Pro or Pro mini" "ATmega328 (3.3V, 8MGz)" * Was able to program the atmega using an external 8MHz clock * Was able to receive one packet with no errors. Got errors for any packet after that * Now for some reason unable to program or receive packet weatherbox/bumblebee/week_9_-_march_14_2017.txt Last modified: 2021/09/19 21:59(external edit)