Attended: Keane, Kevin, Tyler

• Board Deployed but complications arose
  • Board randomly stopped transmitting
  • High winds blew box off of its mount
  • Board currently inside SCEL and now debugging
• Board 5 fully populated
  • charging chip not fully soldered on
  • LED not lighting up with solar panel

• XBee stops transmitting even while supplied with 3.1V
  • Sometimes because of movement
  • Sometimes when moved a lot, still transmits perfectly
  • Sometimes stops transmitting when some pins are touched, but not all the time
• XBee definitely stops transmitting when power is shorted to ground even for a very short time

• Draft new PCB with GPS
  • get rid of led debug lights on sensor board
• Better solder charging circuit and MCU

Contributing authors:

Created by tyamauchi on 2016/12/02 11:16.