Attended: Keane, Kevin, Tyler, Kaeo

• Spoke with Garret on Skype about the board
  • Check the power supply with the ammeter to figure out the current input to the circuit
  • Check voltage across the black capacitors in parallel without the solar panel
  • Solder LEDs on sensor board for firmware to debug
  • Compare notes with cranberry on the sensor boards
  • View the website results from Dragon Fruit's battery voltage output
  • slower clock and take out the 5V boost converter (clock cannot run without 5V)
  • Make sure the sensors can all handle 3.3V
  • Make sure all the parts can run on 8MHz clock rate
• Uploaded Dragon Fruit eagle schematic version 2 to the wiki
• Met with Allie from Firmware to go through what code they have for the board already and what they still need to write
  • Want to know if the board has been programmed already and where that code is
  • Ask Kenny where the battery voltage graph came from
  • Need to figure out how to call the sensors
  • Be able to analyze battery voltage
  • Program sensors

• N/A

• Print housing on Saturday
• Look at the board with Firmware
• Next steps toward programming the board and debugging

• Prepare questions for Allie about programming the board

Contributing authors:

Created by tyamauchi on 2016/09/19 21:35.