Attended: Kevin,Kyaw, Tyler

• Board still transmits after 2 days
  • battery voltage odd (87 mV reading)
  • there is no solar panel but panel voltage is 3.2V (varies)
• This board has the charging circuit removed from it, and we are using an actual charging chip to supply power
  • We need to figure out where the board is getting these odd readings from

• See if old dragon fruit board is working
  • Can confirm that board still transmits when in lab
• Test outside with solar panel and probe the board
• Make sure we have the new parts for another board
• Where is the board reading the solar panel and battery charge data?

• Deploy the board without the solar panel to see if the board works
• Solder crimp connectors to APOGEE solar sensor
• Send email to Dr. Garmire when board is ready to be tested at the rooftop

• Solder parts onto a new board
• Find the problems from the old board

Contributing authors:

Created by tyamauchi on 2017/09/06 21:25.