Tuesday - All members present.

Diwen is working in eagle on sensors. Noah is writing code for the Xbee and trying to draw numbers from the sensor to the Xbee. Keoni is looking up how to connect the Xbee to our bare arduino.

Progress: Diwen finished the schematic side of eagle. Noah finished programming the micro controller to send data to the sensor. Keoni figured out how to connect the Xbee to the bare arduino.

Thursday - All members present.

Debugging 1. Resend packet from router to coordinator to make sure Xbee 2. Test if sensors work 3. Narrow problem down to code or wiring

Things accomplished: - Resent packet correctly - sensors worked - The problem was the wiring

Authors