This is an old revision of the document!
February 12th, 2020
We worked on trying to add in the SP215 feature to the bare guava code, one of the issues we encountered was pin not declared when we have “int const adc = 'pin number'”, instead we would need to have pinmode() in the void setup to double declare it. It worked after this, then we moved on to see if Xbee can communicate properly, so we assemble the Xbee onto the bare Guava and asked Firmware to help set it up, but we didn't manage it let the two Xbee communicate.
Members: Diwen, Rylie, Max– Time: 3:30PM - 5:30PM