Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ==== Updates: ==== - Finished schematic - Tried to read data from sensors using the microprocessor - BMP worked pr-rebuild our bare arduino, nothing works post-rebuild. - Rebuilt board ==== Problems: ==== - (Same as last week) - Irradiance sensor and SHT11 does not read data. - Random values are produced by the irradiance sensor. - Minimum values (-40.0 C) produced by SHT11. - Values are read even when no sensor plugged in...weird. ==== Possible Solutions: ==== - Code is wrong - Microprocessor needs to be reset each time? - Our wiring on our breadboard is incorrect. ==== For Next Time: ==== - Debug code to read data from SHT11 and Irradiance sensor. - Xbee testing - Get code to work dammit. - (Same as last week) - Housing weatherbox/team_lotus/meeting_minutes_4_11_17.txt Last modified: 2021/09/19 21:59(external edit)