• Debugging:
  • We don't know if the PCB-built-weatherbox transmits
  • Have to make sure the polarities of the capacitors are soldered correctly on PCB

• Make housing more symmetrical by changing PCB design (currently the main housing box is off center of the solar panel)
• Add housing space for solar irradiance sensor
• Work on implementing health check features
  • Don't collect data at night
  • Turn off the XBee when not data to transmit
  • When low battery or part isn't sending data, send error packet

• Debugged PCB
  • Made sure all the breakout units on the PCB are getting the power
  • Have yet to test out the PCB with the code
• Solar charging chip is now able to charge the battery
• With the help from Andrew, we have tested the code on the PCB, Weatherbox is now working and collecting correct and expected data

Contributing authors:

Created by jobatake on 2016/05/12 02:43.