Attended: Jennifer, Emily, Andrew, Kim

• Finished programming microprocessors (Programmed through the Arduino)
• Finished testing the temperature sensor (Programmed through the Arduino)
• Finished testing the humidity sensor (Programmed through the Arduino)
• Read data sheet for charging circuit and build

• Microprocessor wasn't compatible with Arduino code that we used to program it.

• Mac Solution: Go to Applications, right click on the Arduino IDE, and go to and click on Show Package Contents.
• Go through Contents→Java→Hardware→tools→avr→etc and open the avrdude.conf.
• Find the ATMega328 section and go to “Signature” at the bottom of the section.
• Change the signature at the end from “0X0F” to “0X14”. Save and now reopen and Arduino Ide and download the bootloader to the microcontroller.
• To upload a sketch you may need to change the signature back to the “0X0F”.

• Fix funding problems- Buy arduinos and cables?
• Work on PDR presentation
• Finish sensors this week (Solar irradiance and pressure)

Contributing authors:

Created by jchun on 2016/02/25 00:38.