Week 3
Meeting Minutes February 3, 2020
Attended: Sharmaine, Mizpah, Arnold, Raellis
Updates
- Did Line of Sight Testing 30-390 feet (3 trials each 30 feet)
- Good results; most 100& data packets sent, lowest 93.33%
To Do
- Debug PCB from last semester
Meeting Minutes February 5, 2020
Attended: Sharmaine, Mizpah, Arnold, Raellis
Updates
- Talked with Dr. Kuh
- Taught Arnold and Raellis a lot of bumblebee
- Configured Xbee S2C (coordinator, relay, send)
- 1 Uploaded Code to Atmega328P
- 2 Coordinator and Relay were not detecting Router Xbee; updated firmware and was able to detect
- 3 Coordinator is not receiving any packets
- 3a. Relay debug LED is not lighting up; no packets are being received or sent
- 3b. May need to recheck code that was uploaded
- 4. Compared working relay code and old relay code
- 4a. Found that the LED was not declared correctly; originally declared as int led=9
- 4b. Changed it to #define led 9 (??????????)
To Do
- Continue debugging old PCB
- Range test Xbee S2C
- Find compatible 5V regulator
- Fabricate a new board that will incorporate Sparkfun 5V regulator
- Use thru holes (header)
- try to finish PCB design by next week Wednesday 2/12
Authors
Contributing authors:
Created by ryoung on 2020/01/23 02:36.