• Worked on debugging the board
• Worked on programming the Cranberry

• all 3 boards had problems
• 3.2 and red 3.5: humidity and pressure sensor doesn't work
• 2nd 3.5: won't program, doesn't sync

• 3.2: had to resolder the manually placed wires because they were wrong (still doesn't work)
• red 3.5: tried replacing pressure sensor - won't come off (still doesn't work)
• 2nd 3.5: re-soldered the clock (still doesn't work)

• Solder humidity sensor to a new board for Dylan
• Power budget
• PDR Presentation
• Reprint Housing if there is time

Contributing authors:

Created by jchun on 2016/09/30 03:47.