Review of the different things in the workbench and how soldering/populating the board is like for Aljaed. The current revision B board is now working and transmitting after debugging with Kenneth, he had to add an external wire aka trace to the XBEE. Some of the data that came into the server was an issue with firmware; they edited the code and have fixed the issue

Started to populate 2x boards, 1 from Rammell and 1 from Aljaed. Aljaed tries to overcome some learning curves for soldering. Start with smaller components (resistors and capacitors)

Continued population of the 2 boards. No real issues, just continuation of adding small components. Aljaed moved onto soldering in the LED's on the board.

Contributing authors:

Created by aereno on 2019/02/18 03:33.