Table of Contents

Bumblebee

BumbleXbee

Introduction

The Bumblebee Weatherbox is the second generation communications module designed to relay meteorological data collected by the other weatherboxes.

Range Testing

Spring 2024 Semester Goals

Fall 2023 Semester Goals

Fall 2022 Semester Goals

Spring 2022 Semester Goals

Fall 2021 Semester Goals

Spring 2021 Semester Goals

Fall 2020 Semester Goals

Spring 2020 Semester Goals

Fall 2019 Semester Goals

Spring 2019 Semester Goals

Fall 2018 Semester Goals

Spring 2017 Semester Goals

Fall 2017 Semester Goals

Deployment

Meeting Minutes (NEWEST on top)

Spring 2024

Fall 2023

Spring 2023

Fall 2022

Spring 2022

Fall 2021

Spring 2021

Fall 2020

Spring 2020

Fall 2019

Spring 2019

Spring 2018

Fall 2018

Spring 2017

Fall 2017

XBee Configuration

3 XBee S2B Pro: 1 coordinator (receiving-end), 2 router (relay & sending-end)

  1. Open XCTU and connect XBee
  2. From Tools, click on XBee Recovery:
    • Select port
    • Product Family: XBP24BZ7
    • Function Set: ZigBee Coordinator API / ZigBee Router API
    • Firmware Version: (Newest)
  3. Change PAN ID to be the same for all 3 XBees
  4. For routers:
    • Change Destination Address to the receiving XBee's SH and SL
      • Relay XBee
        • DH/DL –> coordinator's SH/SL
      • Sending-end XBee
        • DH/DL –> relay's SH/SL
  5. Change API mode from 1(default) –> 2
  6. Make sure to “Write” all changes made

XBee S2C Pro:

Block diagram

Hardware Block Diagram

Communication Block Diagram

Power Budget and Bill of Materials

Eagle

Resources

Our Github Scel-Bumblebee

Presentations

Authors

Contributing authors:

amoore apiladof awong fsonoda iaribal josephr2 kamano lcorpuz mmansanao myerstj rrupley ryoung sjavier trevorkw tthiri xchen yaye yhe2017 zpang

Created by kamano on 2017/01/17 23:03.